| 文書配付日 | 規格番号 | 規格タイトル | 段階 | 投票期限 | IEC文書番号 |
|---|
| 24-03-29 | IEC TS 61000-1-6 ED1 | IEC TS 61000-1-6 ED1: Electromagnetic compatibility (EMC) - Part 1-6: General ? Guide to the evaluation of measurement uncertainty in EMC testing | CD | 24-05-24 | 77/614/CD |
| 24-03-22 | PNW TS 77A-1210 ED1 | PNW TS 77A-1210 ED1: Electromagnetic compatibility (EMC) ? Part 3-10: Limits ? Limits for disturbance voltage and current in the frequency range from 2kHz to 9kHz produced by equipment connected to public low-voltage systems with a rated line current less than or equal to 75 A per phase | NP | 24-06-14 | 77A/1210/NP |
| 24-02-09 | IEC 61000-4-41 ED1 | IEC 61000-4-41 ED1: Electromagnetic compatibility (EMC) - Part 4-41: Testing and measurement techniques - Broadband radiated immunity tests | CDV | 24-05-03 | 77B/884/CDV |
| 24-01-19 | IEC 61000-2-9 ED2 | IEC 61000-2-9 ED2: Electromagnetic compatibility (EMC) - Part 2-9: Environment - Description of HEMP environment - Radiated disturbance, Basic EMC publication | CDV | 24-04-12 | 77C/337/CDV |
| 24-01-12 | IEC 61000-5-6 ED1 | IEC 61000-5-6 ED1: Electromagnetic compatibility (EMC) ? Part 5-6: Installation and mitigation guidelines ? Mitigation of external EM influences | FDIS | 24-02-23 | 77C/339/FDIS |
| 24-01-12 | IEC 61000-4-23/AMD1 ED2 | IEC 61000-4-23/AMD1 ED2: Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | CD | 24-04-05 | 77C/338/CD |
| 23-12-01 | IEC 61000-4-4 ED4 | IEC 61000-4-4 ED4: Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test | CD | 24-01-26 | 77B/882/CD |
| 23-11-17 | IEC 61000-4-2 ED3 | IEC 61000-4-2 ED3: Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | CD | 24-02-09 | 77B/878/CD |
| 23-11-10 | IEC 61000-3-18 | Electromagnetic compatibility (EMC) - Part 3-18: Limits ? Assessment of network characteristics for the application of harmonic emission limits ? Equipment connected to LV distribution systems not covered by IEC 61000-3-2 and IEC 61000-3-12 | DTR | 24-01-05 | 77A/1197/DTR |
| 23-11-03 | IEC TR 61000-1-9 ED1 | IEC TR 61000-1-9 ED1: Electromagnetic compatibility (EMC) - Part 1-9: General ? Evaluation of uncertainty for the measurement of harmonic current emissions | DTR | 23-12-29 | 77A/1194/DTR |
| 23-09-29 | IEC 61000-4-29/FRAG2 ED2 | IEC 61000-4-29/FRAG2 ED2: Fragment 2: Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques ? Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (Introduction of an annex related to the DC environment) | CD | 23-12-22 | 77A/1191/CD |
| 23-09-29 | IEC 61000-4-29/FRAG1 ED2 | IEC 61000-4-29/FRAG1 ED2: Fragment 1: Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques ? Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (General maintenance) | CD | 23-12-22 | 77A/1190/CD |
| 23-09-29 | IEC 61000-2-4 ED3 | IEC 61000-2-4 ED3: Electromagnetic compatibility (EMC) ? Part 2-4: Environment ? Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | CDV | 23-12-22 | 77A/1180/CDV |
| 23-08-18 | IEC 61000-4-41 ED1 | IEC 61000-4-41 ED1: Electromagnetic compatibility (EMC) - Part 4-41: Testing and measurement techniques - Broadband radiated immunity tests | CD | 23-11-10 | 77B/870/CD |
| 23-07-21 | PNW TS 77-596 ED1 | PNW TS 77-596 ED1: Electromagnetic compatibility (EMC) - Part 1-6: General ? Guide to the evaluation of measurement uncertainty | NP | 23-10-13 | 77/596/NP |
| 23-06-28 | IEC 61000-4-30 ED4 | IEC 61000-4-30 ED4: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | CD | 23-09-22 | 77A/1178/CD |
| 23-06-09 | IEC 61000-4-24/AMD1 ED2: Amendment 1 | IEC 61000-4-24/AMD1 ED2: Amendment 1: Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | FDIS | 23-07-21 | 77C/330/FDIS |
| 23-05-26 | IEC 61000-5-6 ED1 | IEC 61000-5-6 ED1: Electromagnetic Compatibility (EMC) ? Part 5-6: Installation and mitigation guidelines ? Mitigation of external EM influences | CDV | 23-08-18 | 77C/326/CDV |
| 23-05-19 | IEC 61000-2-9 ED2: | IEC 61000-2-9 ED2: Electromagnetic compatibility (EMC) - Part 2-9: Environment - Description of HEMP environment - Radiated disturbance, Basic EMC publication | CD | 23-08-11 | 77C/327/CD |
| 23-03-31 | IEC 61000-4-2 ED3 | IEC 61000-4-2 ED3: Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | CD | 23-06-23 | 77B/864/CD |
| 23-03-24 | IEC 61000-4-6 ED5: | IEC 61000-4-6 ED5: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | FDIS | 23-05-05 | 77B/863/FDIS |
| 23-03-10 | IEC 61000-4-41 ED1 | IEC 61000-4-41 ED1: Electromagnetic compatibility (EMC) - Part 4-41: Testing and measurement techniques - Broadband radiated immunity test | CD | 23-05-05 | 77B/861/CD |
| 23-03-03 | IEC TS 61000-3-16 ED1 | IEC TS 61000-3-16 ED1: Electromagnetic compatibility (EMC) - Part 3-16: Limits ? Limits for harmonic currents produced by the inverter of inverter-type electrical energy-supplying equipment with a reference current less than or equal to 75 A per phase connected to public low-voltage systems | DTS | 23-05-26 | 77A/1167/DTS |
| 23-02-24 | Fragment 2: Electromagnetic compatibility (EMC) - Part 2-4 | Fragment 2: Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances (Informative annex describing which environments are included in IEC 61000-2-4 and which ones are excluded) | CD | 23-04-21 | 77A/1165/CD |
| 23-02-24 | IEC 61000-3-2/AMD2 ED5 | IEC 61000-3-2/AMD2 ED5: Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CDV | 23-05-19 | 77A/1161/CDV |
| 23-02-24 | Electromagnetic compatibility (EMC) - Part 1-9 | Electromagnetic compatibility (EMC) - Part 1-9: Assessment of measurement uncertainty for IEC 61000-3-2 and IEC 61000-3-12 | CD | 23-04-21 | 77A/1163A/CD |
| 23-02-10 | IEC 61000-2-4/FRAG1 ED3 | IEC 61000-2-4/FRAG1 ED3: Fragment 1: Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | CD | 23-05-05 | 77A/1164/CD |
| 23-01-27 | IEC TR 61000-1-9 ED1 | IEC TR 61000-1-9 ED1: Assessment of measurement uncertainty for IEC 61000-3-2 and IEC 61000-3-12 | CD | 23-04-21 | 77A/1163/CD |
| 23-01-13 | (EMC) - Part 3-18 | Electromagnetic compatibility (EMC) - Part 3-18: Limits - Assessment of network characteristics for the application of harmonic emission limits for equipment to be connected to LV distribution systems not presently covered by IEC 61000-3-2 and IEC 61000-3-12 | CD | 23-04-07 | 77A/1162/CD |
| 22-12-16 | NP | PNW TS 77A-1160 ED1: IEC 61000-3-17: Electromagnetic compatibility (EMC) - Part 3-17: Limits ? Limitation of voltage fluctuations and flicker in public low-voltage systems ? Energy-producing equipment with rated current less than or equal to 75 A per phase | NP | 23-03-10 | 77A/1160/NP |
| 22-10-28 | IEC 61000-4-2 ED3 | IEC 61000-4-2 ED3: Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | CD | 23-01-20 | 77B/858/CD |
| 22-09-30 | IEC TR 61000-2-15 ED1 | IEC TR 61000-2-15 ED1: Electromagnetic compatibility - Part 2-15: Description of the characteristics of networks with high penetration of power electronics equipment | DTR | 22-11-18 | 77A/1153A/DTR |
| 22-09-23 | IEC TR 61000-1-1 ED2 | IEC TR 61000-1-1 ED2: Electromagnetic compatibility (EMC) - Part 1-1: General - Application and interpretation of fundamental definitions and terms | DTR | 22-11-18 | 77/586/DTR |
| 22-09-23 | IEC TR 61000-5-1 ED2 | IEC TR 61000-5-1 ED2: Electromagnetic compatibility (EMC) - Part 5-1: Installation and mitigation guidelines - General considerations | DTR | 22-11-18 | 77/585/DTR |
| 22-08-26 | IEC TR 61000-2-15 ED1 | IEC TR 61000-2-15 ED1: Electromagnetic compatibility - Part 2-15: Description of the characteristics of networks with high penetration of power electronics equipment | DTR | 22-10-21 | 77A/1153/DTR |
| 22-07-29 | IEC 61000-3-2/AMD2/FRAG4 ED5 | IEC 61000-3-2/AMD2/FRAG4 ED5: Amendment 2/Fragment 4: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 22-10-21 | 77A/1152/CD |
| 22-07-29 | IEC 61000-3-2/AMD2/FRAG2 ED5 | IEC 61000-3-2/AMD2/FRAG3 ED5: Amendment 2/Fragment 3: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 22-10-21 | 77A/1151/CD |
| 22-07-29 | IEC 61000-3-2/AMD2/FRAG1 ED5 | IEC 61000-3-2/AMD2/FRAG2 ED5: Amendment 2/Fragment 2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 22-10-21 | 77A/1150/CD |
| 22-07-29 | IEC 61000-3-2/AMD2/FRAG1 ED5 | IEC 61000-3-2/AMD2/FRAG1 ED5: Amendment 2/Fragment 1: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 22-10-21 | 77A/1149/CD |
| 22-07-22 | IEC 61000-5-6 ED1 | IEC 61000-5-6 ED1: Electromagnetic Compatibility (EMC) ? Part 5-6: Installation and mitigation guidelines ? Mitigation of external EM influences | CD | 22-10-14 | 77C/324/CD |
| 22-04-29 | IEC 61000-4-30 ED4 | IEC 61000-4-30 ED4: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | CD | 22-07-22 | 77A/1143/CD |
| 22-02-11 | IEC TR 61000-2-15 ED1 | IEC TR 61000-2-15 ED1: Electromagnetic compatibility - Part 2-15: Environment - Description of the characteristics of networks with high penetration of power electronics equipment | CD | 22-05-06 | 77A/1139/CD |
| 22-01-21 | IEC TS 61000-3-16 ED1 | IEC TS 61000-3-16 ED1: Electromagnetic compatibility (EMC) - Part 3-16: Limits - Limits for currents produced by the inverter of inverter-type electrical energy-supplying equipment with a reference current less than or equal to 75 A per phase connected to public low-voltage systems | CD | 22-04-15 | 77A/1138/CD |
| 22-01-07 | IEC TR 61000-1-4 ED2 | IEC TR 61000-1-4 ED2: Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz | DTR | 22-03-04 | 77A/1136/DTR |
| 21-12-10 | IEC 61000-4-20 ED3: | IEC 61000-4-20 ED3: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | FDIS | 22-01-21 | 77B/853/FDIS |
| 21-09-10 | IEC 61000-2-10 ED2 | IEC 61000-2-10 ED2: Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | FDIS | 21-10-22 | 77C/318/FDIS |
| 21-08-27 | IEC TR 61000-1-1 ED2 | IEC TR 61000-1-1 ED2: Electromagnetic compatibility (EMC) - Part 1-1: General - Application and interpretation of fundamental definitions and terms | CD | 21-12-17 | 77/574/CD |
| 21-08-27 | IEC TR 61000-5-1 ED2 | IEC TR 61000-5-1 ED2: Electromagnetic compatibility (EMC) - Part 5-1: Installation and mitigation guidelines - General considerations | CD | 21-12-17 | 77/571/CD |
| 21-07-09 | IEC TS 61000-3-16 ED1 | IEC TS 61000-3-16 ED1: Electromagnetic compatibility (EMC) - Part 3-16: Limits - Limits for currents produced by the inverter of inverter-type electrical energy-supplying equipment with a reference current less than or equal to 75 A per phase connected to public low-voltage systems | CD | 21-10-01 | 77A/1108/CD |
| 21-07-02 | IEC 61000-4-6 ED5 | IEC 61000-4-6 ED5: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | CD | 21-09-24 | 77B/843/CD |
| 21-06-18 | NP | PNW 77C-315 ED1: Electromagnetic Compatibility (EMC) ? Part 5-6: Installation and mitigation guidelines ? Mitigation of external EM influences | NP | 21-09-10 | 77C/315/NP |
| 21-06-18 | IEC 61000-4-24/AMD1 ED2 | IEC 61000-4-24/AMD1 ED2: Amendment 1: Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | CDV | 21-09-10 | 77C/307/CDV |
| 21-05-07 | IEC 61000-4-2 ED3 | IEC 61000-4-2 ED3: Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test | CD | 21-07-30 | 77B/841/CD |
| 21-04-16 | IEC TR 61000-1-4 ED2 | IEC TR 61000-1-4 ED2: Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz | CD | 21-07-09 | 77A/1097/CD |
| 20-11-27 | IEC 61000-2-10 ED2 | IEC 61000-2-10 ED2: Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | CDV | 21-02-19 | 77C/301/CDV |
| 20-07-24 | IEC 61000-4-30/AMD1 ED3 | IEC 61000-4-30/AMD1 ED3: Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | CDV | 20-10-16 | 77A/1080/CDV |
| 20-07-10 | IEC TS 61000-3-16 ED1 | IEC TS 61000-3-16 ED1: Electromagnetic compatibility (EMC) - Part 3-16: Limits - Limits for harmonic currents produced by energy supplying equipment with a rated current less than or equal to 75 A per phase connected to public low-voltage systems | CD | 20-10-02 | 77A/1086/CD |
| 20-05-22 | IEC 61000-4-3 ED4 | IEC 61000-4-3 ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | FDIS | 20-07-03 | 77B/830/FDIS |
| 20-05-15 | IEC 61000-3-3/AMD2 ED3: | IEC 61000-3-3/AMD2 ED3: Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ?16 A per phase and not subject to conditional connection | CDV | 20-08-07 | 77A/1075/CDV |
| 20-05-01 | IEC 61000-3-2/AMD1 ED5 | IEC 61000-3-2/AMD1 ED5: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | FDIS | 20-06-12 | 77A/1077/FDIS |
| 19-12-13 | NP | PNW 77B-826: Electromagnetic compatibility (EMC) - Part 4-xx: Testing and measurement techniques - Broadband radiated immunity test | NP | 20-01-10 | 77B/826/NP |
| 19-11-29 | IEC 61000-4-24/AMD1 ED2: Amendment 1 | IEC 61000-4-24/AMD1 ED2: Amendment 1: Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | CD | 20-02-21 | 77C/296/CD |
| 19-11-29 | IEC 61000-3-2/AMD1/FRAG2 ED5: | IEC 61000-3-2/AMD1/FRAG2 ED5: Amendment 1/Fragment 2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CDV | 20-02-21 | 77A/1058/CDV |
| 19-11-22 | IEC 61000-4-36 ED2 | IEC 61000-4-36 ED2: Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems | FDIS | 20-01-03 | 77C/295/FDIS |
| 19-11-15 | IEC 61000-4-20 ED3 | IEC 61000-4-20 ED3: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CDV | 19-11-29 | 77B/805B/CDV |
| 19-11-08 | NP | PNW TS 77A-1061 ED1: Electromagnetic compatibility (EMC) - Part 3-16: Limits - Limits for harmonic currents produced by energy supplying equipment connected to public low-voltage systems with a rated current less than or equal to 75 A per phase | NP | 20-01-31 | 77A/1061/NP |
| 19-10-25 | IEC 61000-4-20 ED3 | IEC 61000-4-20 ED3: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CDV | 19-11-29 | 77B/805A/CDV |
| 19-10-18 | IEC 61000-3-12/AMD1/FRAG1 ED2: Amendment 1/Fragment 1 | IEC 61000-3-12/AMD1/FRAG1 ED2: Amendment 1/Fragment 1: Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ? 75 A per phase | CDV | 20-01-10 | 77A/1042/CDV |
| 19-10-04 | IEC TR 61000-4-40 ED1 | IEC TR 61000-4-40 ED1: Electromagnetic compatibility (EMC) ? Part 4-40: Testing and measurement techniques ? Digital methods for the measurement of power quantities of modulated or distorted signals | DTR | 19-11-29 | 77A/1055/DTR |
| 19-09-06 | IEC 61000-4-20 ED3 | IEC 61000-4-20 ED3: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CDV | 19-11-29 | 77B/805/CDV |
| 19-08-23 | IEC 61000-4-11 ED3: | IEC 61000-4-11 ED3: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase | FDIS | 19-10-04 | 77A/1039/FDIS |
| 19-08-09 | IEC 61000-4-6 ED5 | IEC 61000-4-6 ED5: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | CD | 19-10-04 | 77B/812/CD |
| 19-08-02 | IEC 61000-2-10 ED1 | Review report on IEC 61000-2-10 ED1: Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance | CD | 19-10-25 | 77C/287/CD |
| 19-06-14 | IEC 61000-3-2/AMD1/FRAG1 ED5 | IEC 61000-3-2/AMD1/FRAG1 ED5: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CDV | 19-09-06 | 77A/1028/CDV |
| 19-04-19 | IEC 61000-3-2/AMD1/FRAG2 ED5: | IEC 61000-3-2/AMD1/FRAG2 ED5: Fragment 2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 19-07-12 | 77A/1027/CD |
| 19-03-15 | IEC 61000-4-25 Ed. 1 Amendment 2: | IEC 61000-4-25 Ed. 1 Amendment 2: Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | CDV | 19-06-07 | 77C/285/CDV |
| 19-03-01 | IEC 61000-4-3 ED4 | IEC 61000-4-3 ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | CDV | 19-05-24 | 77B/798/CDV |
| 19-01-18 | IEC 61000-4-18 ED2: | IEC 61000-4-18 ED2: Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | FDIS | 19-03-01 | 77B/797/FDIS |
| 18-12-28 | IEC 61000-4-11 ED3 | IEC 61000-4-11 ED3: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase | CDV | 19-03-22 | 77A/1016/CDV |
| 18-12-14 | IEC TR 61000-4-40 ED1 | IEC TR 61000-4-40 ED1: Electromagnetic compatibility (EMC) ? Part 4-40: Testing and measurement techniques ? Digital methods for the measurement of power quantities of modulated or distorted signals | CD | 19-02-08 | 77A/1020/CD |
| 18-11-30 | : IEC 61000-3-2/AMD1/FRAG1 ED5 | IEC 61000-3-2/AMD1/FRAG1 ED5: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 19-01-25 | 77A/1018/CD |
| 18-11-02 | IEC 61000-3-12/AMD1/FRAG1 ED2: Fragment 1 | IEC 61000-3-12/AMD1/FRAG1 ED2: Fragment 1: Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ? 75 A per phase | CD | 18-12-28 | 77A/1015/CD |
| 18-08-10 | IEC 61000-4-36 ED2: | IEC 61000-4-36 ED2: Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems | CDV | 18-11-02 | 77C/284/CDV |
| 18-07-13 | IEC 61000-4-11 ED3: | IEC 61000-4-11 ED3: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | CD | 18-09-07 | 77A/1009/CD |
| 18-07-13 | IEC 61000-3-2/AMD1/FRAG1 ED5 | IEC 61000-3-2/AMD1/FRAG1 ED5: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | CD | 18-09-07 | 77A/1006/CD |
| 18-06-15 | IEC TR 61000-1-8 ED1 | IEC TR 61000-1-8 ED1: Electromagnetic Compatibility - Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply networks, and future expectation | DTR | 18-08-10 | 77A/1002/DTR |
| 18-06-01 | IEC 61000-4-3 ED4: | IEC 61000-4-3 ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | CDV | 18-08-24 | 77B/792/CDV |
| 18-04-2 | EC 61000-4-18 ED2 | EC 61000-4-18 ED2: Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | CDV | 18-07-13 | 77B/790/CDV |
| 17-10-10 | IEC 61000-2-2 Ed2 A2: | IEC 61000-2-2 Ed2 A2: Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | CDV | 18-02-02 | 77A/980/CDV |
| 17-11-03 | IEC 61000-4-25 Ed. 1 Amendment 2: | IEC 61000-4-25 Ed. 1 Amendment 2: Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | CD | 18-01-26 | 77C/276/CD |
| 17-11-03 | IEC 61000-3-2 ED5 | IEC 61000-3-2 ED5: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase) | FDIS | 17-12-15 | 77A/986/FDIS |
| 17-10-20 | IEC 61000-4-20 ED3 | IEC 61000-4-20 ED3: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CD | 18-01-12 | 77B/788/CD |
| 17-10-20 | IEC TR 61000-1-8 ED1 | IEC TR 61000-1-8 ED1: EMC - Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply networks, and future expectation | CD | 18-01-12 | 77A/983/CD |
| 17-09-01 | IEC 61000-4-3 ED4: | IEC 61000-4-3 ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | CD | 17-10-27 | 77B/781A/CD |
| 17-08-04 | IEC 61000-4-3 ED4: | IEC 61000-4-3 ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | CD | 17-10-27 | 77B/781/CD |
| 17-06-09 | IEC 61000-4-15/ISH1 ED2: | IEC 61000-4-15/ISH1 ED2: Interpretation Sheet 1- Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | FDIS | 17-07-21 | 77A/966/FDIS |
| 17-05-12 | IEC 61000-4-18 ED2: | IEC 61000-4-18 ED2: Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | CD | 17-07-07 | 77B/776/CD |
| 17-04-07 | IEC 61000-4-36 ED2 | IEC 61000-4-36 ED2: Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems | CD | 17-07-28 | 77C/263/CD |
| 17-04-07 | IEC 61000-2-2 Ed2 A2: | IEC 61000-2-2 Ed2 A2: Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | CD | 17-06-30 | 77A/959/CD |
| 17-03-31 | IEC 61000-2-2/AMD1 ED2: Amendment 1 | IEC 61000-2-2/AMD1 ED2: Amendment 1 - Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | FDIS | 17-05-12 | 77A/958/FDIS |
| 17-03-24 | Q | Appointment of a Project Leader for new SC77A PT “61000-3-18-under WG1 supervision”: Assessment of harmonic emission limits for equipment to be connected to LV distribution systems with nominal voltage other than 230 V and 230/400 V ? Complement to IEC 61000-3-2 and 61000-3-12 | Q | 17-05-19 | 77A/957/Q |
| 17-03-24 | DC | Maintenance Program - Call for comments regarding the preparation of IEC 61000-3-11 Ed.3.0: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | DC | 17-05-12 | 77A/956/DC |
| 17-02-24 | IEC 61000-3-3/AMD1 ED3: Amendment 1 | IEC 61000-3-3/AMD1 ED3: Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection | FDIS | 17-04-07 | 77A/952/FDIS |
| 17-02-24 | IEC 61000-4-11/AMD1 ED2 | IEC 61000-4-11/AMD1 ED2: Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | FDIS | 17-04-07 | 77A/951/FDIS |
| 17-01-27 | IEC 61000-4-3 ED4 | IEC 61000-4-3 ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test | CD | 17-04-21 | 77B/771/CD |
| 16-12-23 | IEC 61000-4-39 ED1 | IEC 61000-4-39 ED1: Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test | FDIS | 17-02-03 | 77B/769/FDIS |
| 16-12-16 | AC | Appointment of a new convenor for WG 8 of IEC SC 77A: Description of the electromagnetic environment associated with the disturbances present on electricity supply networks | AC | 17-01-27 | 77A/945/AC |
| 16-12-16 | Q | Questionnaire Standardization of current harmonic emission limits for equipment connected to LV networks such as those found in North America | Q | 17-02-10 | 77A/944/Q |
| 16-11-18 | IEC 61000-4-20 | IEC 61000-4-20: Electromagnetic compatibility (EMC) - Part 4-20 : Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CD | 17-01-06 | 77B/766B/CD |
| 16-11-11 | IEC TS 61000-5-10: | IEC TS 61000-5-10: Electromagnetic Compatibility (EMC) - Part 5 - 10: Installation and mitigation guidelines - Guide to the protection of facilities against HEMP and IEMI | DTS | 17-02-03 | 77C/260/DTS |
| 16-11-04 | IEC 61000-4-20 | IEC 61000-4-20: Electromagnetic compatibility (EMC) - Part 4-20 : Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CD | 17-01-06 | 77B/766A/CD |
| 16-11-04 | IEC 61000-4-12: | IEC 61000-4-12: Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test | CDV | 17-01-27 | 77B/764/CDV |
| 16-11-04 | Amendment 1 to IEC 61000-4-5 | Amendment 1 to IEC 61000-4-5: Addition to clause 7.3; new Annex I
| CDV | 17-01-27 | 77B/762/CDV |
| 16-10-28 | IEC 61000-3-2 (f1): | IEC 61000-3-2 (f1): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CDV | 17-01-20 | 77A/936/CDV |
| 16-10-14 | IEC 61000-4-20 | IEC 61000-4-20 Electromagnetic compatibility (EMC) - Part 4-20 : Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | CD | 17-01-06 | 77B/766/CD |
| 16-10-07 | DC | CANADA NC New Work Item Proposals: Standardization of current harmonic emission limits for equipment connected to LV networks such as those found in North America | DC | 16-11-25 | 77A/938/DC |
| 16-10-07 | IEC 61000-3-2 (f3): | IEC 61000-3-2 (f3): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CDV | 16-12-30 | 77A/935/CDV |
| 16-10-07 | IEC 61000-3-2 (f4): | IEC 61000-3-2 (f4): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CDV | 16-12-30 | 77A/934/CDV |
| 16-08-12 | IEC TR 61000-2-5 | IEC TR 61000-2-5: Electromagnetic Compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | DTR | 16-09-30 | 77/525A/DTR |
| 16-08-05 | IEC TR 61000-2-5 | IEC TR 61000-2-5: Electromagnetic Compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | DTR | 16-09-30 | 77/525/DTR |
| 16-07-22 | Amendment 1 to IEC 61000-3-3 | Amendment 1 to IEC 61000-3-3 : Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection | CDV | 16-10-14 | 77A/931/CDV |
| 16-07-22 | IEC 61000-3-11 Ed.2 | IEC 61000-3-11 Ed.2: Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <=75 A and subject to conditional connection | CDV | 16-10-14 | 77A/929/CDV |
| 16-07-08 | Maintenance of IEC 61000-3-12 | Maintenance of IEC 61000-3-12: Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase | DC | 16-09-02 | 77A/933/DC |
| 16-06-10 | Amendment 1 to IEC 61000-2-2 Ed.2 | Amendment 1 to IEC 61000-2-2 Ed.2: Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | CDV | 2016-09-02 | 77A/926/CDV |
| 16-06-03 | IEC 61000-6-2 Ed. 3 | IEC 61000-6-2 Ed. 3: Electromagnetic compatibility (EMC) - Part 6-2: Generic Standards - Immunity standard for industrial environments | FDIS | 16-07-15 | 77/521/FDIS |
| 16-05-27 | IEC 61000-4-31 | IEC 61000-4-31 - ELECTROMAGNETIC COMPATIBILITY (EMC) - Part 4-31: Testing and measurement techniques -AC mains ports broadband conducted disturbance immunity test | FDIS | 16-07-08 | 77B/758/FDIS |
| 16-05-27 | IEC 61000-6-1 | IEC 61000-6-1: Generic Standards - Immunity standard for residential, commercial and light-industrial environments | FDIS | 16-07-08 | 77/520/FDIS |
| 16-05-20 | DC | Document for comments regarding IEC 61000-4-15 Ed.2 in view of the preparation of an Interpretation Sheet (ISH) | DC | 16-07-01 | 77A/932/DC |
| 16-05-06 | IEC TS 61000-5-10 Ed. 1 | IEC TS 61000-5-10 Ed. 1: Guide to the application of HEMP and IEMI publications
| CD | 16-07-01 | 77C/256/CD |
| 16-04-29 | Amendment 1 to IEC 61000-4-11 | Amendment 1 to IEC 61000-4-11: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | CDV | 16-07-22 | 77A/925/CDV |
| 16-03-22 | IEC 61000-4-12 | IEC 61000-4-12: Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test | CD | 16-06-10 | 77B/757/CD |
| 16-03-11 | DC | Maintenance of documents IEC/TR 61000-5-1 Ed. 1 and IEC/TR 61000-5-2 Ed. 1
| DC | 16-05-06 | 77/518/DC |
| 16-03-11 | IEC TR 61000-2-5 | IEC TR 61000-2-5: Electromagnetic Compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | CD | 16-05-06 | 77/517/CD |
| 16-02-05 | IEC 61000-4-39 | IEC 61000-4-39 - Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test | CDV | 16-05-06 | 77B/751/CDV |
| 16-02-05 | IEC 61000-1-2 | IEC 61000-1-2: Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | FDIS | 16-03-18 | 77/513/FDIS |
| 16-01-22 | DC | Maintenance of IEC 61000-4-18 Ed.1.1
| DC | 16-03-25 | 77B/754/DC |
| 16-01-08 | IEC 61000-4-23 | IEC 61000-4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | CDV | 16-04-08 | 77C/253/CDV |
| 16-01-08 | Q | Nomination for Chair of SC 77C: High power transient phenomena
| Q | 16-02-19 | 77/509/Q |
| 15-12-18 | IEC 61000-3-2 (f2) | IEC 61000-3-2 (f2): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CDV | 16-03-04 | 77A/912A/CDV |
| 15-11-27 | Revision of IEC 60079-11:2011 Edition 6 | IEC 61000-3-2 (f2): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CDV | 16-03-04 | 77A/912/CDV |
| 15-11-13 | IEC 61000-3-2 (f3) | IEC 61000-3-2 (f3): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CD | 16-01-15 | 77A/918/CD |
| 15-11-06 | Maintenance of publication: IEC 61000-2-2 | Maintenance of publication: IEC 61000-2-2: Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | CD | 16-01-15 | 77A/915/DC |
| 15-11-06 | IEC 61000-2-2 Ed.2 A1 | IEC 61000-2-2 Ed.2 A1: Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | CD | 16-01-15 | 77A/914/CD |
| 15-09-18 | IEC TR 61000-1-7 | IEC TR 61000-1-7: Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single phase systems under non-sinusoidal conditions | DTR | 15-11-20 | 77A/911/DTR |
| 15-09-11 | IEC TR 61000-4-40 | IEC TR 61000-4-40: Electromagnetic compatibility (EMC) - Part 4-40: Testing and measurement techniques - Digital methods for the measurement of power quantities under non-stationary conditions | CD | 15-12-11 | 77A/909/CD |
| 15-09-04 | IEC TR 61000-4-37 | IEC TR 61000-4-37 : Electromagnetic Compatibility (EMC) : Testing and measurement techniques - Calibration and verification protocol for harmonic emission compliance test systems | DTR | 15-11-06 | 77A/907/DTR |
| 15-09-04 | IEC 61000-4-16: | IEC 61000-4-16: Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | FDIS | 15-11-06 | 77A/905/FDIS |
| 15-09-04 | Amendment 2 to IEC 61000-4-13: | Amendment 2 to IEC 61000-4-13: Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | FDIS | 15-11-06 | 77A/904/FDIS |
| 15-08-28 | IEC 61000-6-2 | IEC 61000-6-2: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments | CDV | 15-12-04 | 77/488/CDV |
| 15-08-28 | IEC 61000-6-1 | IEC 61000-6-1: Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments | CDV | 15-12-04 | 77/487/CDV |
| 15-08-07 | IEC TR 61000-2-5 | IEC TR 61000-2-5: Electromagnetic Compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | CD | 15-11-13 | 77/501/CD |
| 15-07-31 | IEC 61000-4-24 | IEC 61000-4-24: Electromagnetic Compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | FDIS | 15-10-02 | 77C/245/FDIS |
| 15-07-31 | IEC TR 61000-4-1 | IEC TR 61000-4-1: Electromagnetic Compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of the IEC 61000-4 series | DTR | 15-10-02 | 77/498/DTR |
| 15-07-24 | IEC 61000-4-39 | IEC 61000-4-39 - Electromagnetic compatibility (EMC) - Part 4-39:Testing and measurement techniques - Radiated fields in close proximity immunity test | CD | 15-10-30 | 77B/736/CD |
| 15-07-24 | DC | Maintenance of publication IEC/TR 61000-1-1 Ed. 1 - Electromagnetic compatibility (EMC) - Part 1-1: General - Application and interpretation of fundamental definitions and terms | DC | 15-09-11 | 77/493/DC |
| 15-06-19 | IEC 61000-6-5 | IEC 61000-6-5: Compatibilit? ?lectromagn?tique (CEM) - Partie 6-5: Normes g?n?riques - Immunit? pour les ?quipements utilis?s dans les environnements de centrales ?lectriques et de postes | FDIS | 15-07-31 | 77/484F/FDIS |
| 15-06-05 | Amendment 1 to IEC 61000-4-11: | Amendment 1 to IEC 61000-4-11: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | CD | 15-09-11 | 77A/892/CD |
| 15-05-29 | IEC 61000-6-5 | IEC 61000-6-5: Electromagnetic Compatibility (EMC) - Part 6-5: Generic Standards - Immunity for equipment used in power station and substation environments | FDIS | 15-07-31 | 77/484/FDIS |
| 15-05-15 | DC | Proposal to revise the stability date of IEC 61000-4-5 Ed.3.0
| DC | 15-07-03 | 77B/734/DC |
| 15-04-24 | IEC 61000-4-10 | IEC 61000-4-10 - Compatibilt? El?ctromagn?tique (CEM) - Partie 4-10: Techniques d'essai et de mesure -Essai d'immunit? au champ magn?tique oscillatoire amorti | CDV | 15-07-17 | 77B/730F/CDV |
| 15-04-24 | IEC 61000-4-9 | IEC 61000-4-9 - Compatibilt? Electromagn?tique (CEM) - Partie 4-9: Techniques d'essai et de mesure - Essai d'immunit? au champ magn?tique impulsionnel | CDV | 15-07-17 | 77B/728F/CDV |
| 15-04-17 | IEC 61000-4-10 | IEC 61000-4-10 - Electromagnetic Compatibilty (EMC) - Part 4-10: Testing and measurement techniques -Damped oscillatory magnetic field immunity test | CDV | 15-07-17 | 77B/730/CDV |
| 15-04-17 | IEC 61000-4-9 | IEC 61000-4-9 - Electromagnetic Compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test | CDV | 15-07-17 | 77B/728/CDV |
| 15-04-03 | DC | Maintenance of 61000-4-12 edition 2 - Call for comments and experts
| DC | 15-06-19 | 77B/732A/DC |
| 15-04-03 | DC | Maintenance of IEC 61000-4-2/Ed.2 - Call for comments and experts
| DC | 15-06-19 | 77B/731A/DC |
| 15-04-03 | IEC/TR 61000-3-11 | IEC/TR 61000-3-11: Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <=75 A and subject to conditional connection | CD | 15-07-03 | 77A/887/CD |
| 15-03-27 | DC | IEC 61000-4-12 edition 2 was published in 2006 and its next Maintenance Result Date is 2015. | DC | 15-06-19 | 77B/732/DC |
| 15-03-27 | DC | IEC 61000-4-2 edition 2 was published in 2008 and its next Maintenance Result Date is 2016. | DC | 15-06-19 | 77B/731/DC |
| 15-03-27 | IEC 61000-4-31: | IEC 61000-4-31: Electromagnetic Compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test | CDV | 15-07-03 | 77B/726/CDV |
| 15-03-27 | IEC 61000-3-3 Ed3 A1: | IEC 61000-3-3 Ed3 A1: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection | CD | 15-07-03 | 77A/884/CD |
| 15-02-20 | IEC TR 61000-4-38 | IEC TR 61000-4-38: Electromagnetic Compatibility (EMC) : Testing and measurement techniques - Test, verification, and calibration protocol for voltage fluctuations and flicker compliance test systems | DTR | 15-04-24 | 77A/881/DTR |
| 15-02-20 | IEC TR 61000-4-1 | IEC TR 61000-4-1: Electromagnetic Compatibilty (EMC) - Part 4-1: Testing and measurement techniques - Overview of the IEC 61000-4 series | CD | 15-05-22 | 77/481/CD |
| 15-02-13 | IEC 61000-6-1 | IEC 61000-6-2: Electromagnetic Compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments | CD | 15-05-15 | 77/479/CD |
| 15-02-13 | IEC 61000-6-1 | IEC 61000-6-1: Electromagnetic Compatibilty (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments | CD | 15-05-15 | 77/478/CD |
| 15-01-30 | Amendment 2 to IEC 61000-4-13 | Amendment 2 to IEC 61000-4-13: Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques -Harmonics and interharmonics including mains signalling at a.c. power port, low frequencyimmunity tests | CDV | 15-05-01 | 77A/877/CDV |
| 15-01-30 | Amendment 3 to IEC 61000-4-16 | Amendment 3 to IEC 61000-4-16: Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | CDV | 15-05-01 | 77A/876/CDV |
| 15-01-09 | IEC 61000-1-2: | IEC 61000-1-2: Electromagnetic compatibility (EMC) Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | CDV | 15-04-10 | 77/471/CDV |
| 14-11-28 | IEC 61000-4-24: | IEC 61000-4-24: Electromagnetic Compatibility (EMC) - Part 4 - 24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance - Proposed Horizontal Standard | CDV | 15-03-06 | 77C/238/CDV |
| 14-11-21 | Q | Nomination of a Chair for SC 77B: High frequency phenomena
| Q | 15-01-09 | 77/472/Q |
| 14-11-07 | IEC 61000-4-23: | IEC 61000-4-23: Electromagnetic Compatibility (EMC) - Part 4 - 23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | CD | 15-02-13 | 77C/240/CD |
| 14-11-07 | IEC 61000-4-30 | IEC 61000-4-30: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques -Power quality measurement methods | FDIS | 15-01-09 | 77A/873/FDIS |
| 14-10-17 | IEC 61000-4-10 | IEC 61000-4-10: Electromagnetic Compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test | CD | 15-01-23 | 77B/724/CD |
| 14-10-10 | IEC 61000-4-9 | IEC 61000-4-9: Electromagnetic Compatibility (EMC) - Part 4-9:Testing and measurement techniques - Impulse magnetic field immunity test | CD | 15-01-16 | 77B/722/CD |
| 14-08-22 | IEC 61000-3-2 (f2) | IEC 61000-3-2 (f2): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CD | 15-01-02 | 77A/867/CD |
| 14-08-22 | IEC 61000-3-2 (f1) | IEC 61000-3-2 (f1): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CD | 15-01-02 | 77A/866/CD |
| 14-08-22 | IEC TR 61000-1-7 | IEC TR 61000-1-7: Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single phase systems under non-sinusoidal conditions | CD | 14-11-28 | 77A/869/CD |
| 14-08-22 | DC | Future status of publication IEC/TR 61000-2-3 Ed. 1 - Electromagnetic compatibility (EMC) - Part 2-3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena | DC | 14-10-24 | 77/467/DC |
| 14-08-15 | IEC 61000-6-2 Ed. 3: | IEC 61000-6-2 Ed. 3: Electromagnetic Compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments | CD | 14-11-21 | 77/466/CD |
| 14-08-15 | IEC 61000-6-1: | IEC 61000-6-1: Electromagnetic Compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments | CD | 14-11-21 | 77/465/CD |
| 14-08-08 | AC | Chairmanship of SC 77B: High frequency phenomena
| AC | 14-11-14 | 77B/718/AC |
| 14-08-08 | Q | Appointment of a new SC 77A representative in the Advisory Committee on EMC (ACEC) | Q | 14-09-19 | 77A/863/Q |
| 14-08-01 | Q | Continuation of SC 77C membership of ACEC
| Q | 14-09-12 | 77C/235/Q |
| 14-07-18 | IEC 61000-6-7 | IEC 61000-6-7: Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations | FDIS | 14-09-19 | 77/462/FDIS |
| 14-07-04 | IEC 61000-4-39 | IEC 61000-4-39: Electromagnetic compatibilt? (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity immunity test | CD | 14-10-10 | 77B/717/CD |
| 14-07-04 | IEC 61000-4-31 | IEC 61000-4-31: Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test | CD | 14-10-10 | 77B/716/CD |
| 14-07-04 | Amendment to IEC 61000-4-16 | Amendment to IEC 61000-4-16: Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHzs | CD | 14-10-10 | 77A/862/CD |
| 14-07-04 | Amendment to IEC 61000-4-13 | Amendment to IEC 61000-4-13: Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | CD | 14-10-10 | 77A/861/CD |
| 14-06-27 | IEC 61000-3-11 | IEC 61000-3-11: Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <=75 A and subject to conditional connection | CD | 14-10-03 | 77A/860/CD |
| 14-06-20 | IEC 61000-6-5: | IEC 61000-6-5: Electromagnetic compatibility (EMC) Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environments | CDV | 14-09-26 | 77/459/CDV |
| 14-04-25 | IEC 61000-1-2 | IEC 61000-1-2: Electromagnetic Compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | CD | 14-07-25 | 77/460/CD |
| 14-04-18 | IEC TR 61000-4-38 | IEC TR 61000-4-38 : Electromagnetic Compatibility (EMC) : Testing and measurement techniques - Calibration and Verification Protocol for Flicker Compliance test systems | CD | 14-07-18 | 77A/855/CD |
| 14-04-18 | DC | Maintenance programme -IEC 61000-3-3: EMC - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection | DC | 14-05-30 | 77A/851A/DC |
| 14-04-11 | IEC 61000-4-36 | IEC 61000-4-36: Electromagnetic Compatibility (EMC) - Part 4 - 36: Testing and measurement techniques - IEMI Immunity Test Methods for Equipment and Systems | CDV | 14-07-11 | 77C/231/CDV |
| 14-04-04 | DC | Maintenance programme -IEC 61000-3-3: EMC - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection | DC | 14-05-30 | 77A/851/DC |
| 14-03-28 | IEC 61000-4-24 | IEC 61000-4-24: Electromagnetic Compatibility (EMC) - Part 4 - 24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | CD | 14-07-04 | 77C/233/CD |
| 14-03-21 | NP | IEC 61000-5-x: Guide to the Application of HEMP and IEMI Publications
| NP | 14-06-27 | 77C/232/NP |
| 14-02-28 | IEC 61000-4-9 | IEC 61000-4-9: Electromagnetic Compatibility (EMC) - Part 4-9:Testing and measurement techniques - Impulse magnetic field immunity test | CD | 14-05-30 | 77B/713/CD |
| 14-02-21 | DC | Maintenance programme - Call for comments regarding maintenance of IEC 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | DC | 14-04-11 | 77A/847/DC |
| 14-02-07 | IEC 61000-3-2 A3 Ed.3 | IEC 61000-3-2 A3 Ed.3: Amendment 3 to IEC 61000-3-2 Ed.3: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current < 16 A per phase) | FDIS | 14-04-11 | 77A/846/FDIS |
| 14-02-07 | IEC 61000-4-19 | IEC 61000-4-19: Electromagnetic Compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range from 2 kHz to 150 kHz, at a.c. power ports | FDIS | 14-04-11 | 77A/845/FDIS |
| 14-01-24 | IEC 61000-6-2 | IEC 61000-6-2: Electromagnetic Compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments | CD | 14-04-25 | 77/457/CD |
| 14-01-24 | IEC 61000-6-1 | IEC 61000-6-1: Electromagnetic Compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments | CD | 14-04-25 | 77/456/CD |
| 14-01-17 | IEC 61000-4-5 | IEC 61000-4-5: Electromagnetic compatibility (EMC): Part 4-5: Testing and measurement techniques - Surge immunity test | FDIS | 14-03-21 | 77B/711/FDIS |
| 14-01-10 | IEC 61000-4-30 | IEC 61000-4-30: Electromagnetic Compatibility (EMC) - Part 4-30: Testing and measurement techniques -Power quality measurement methods | CDV | 14-04-11 | 77A/838/CDV |
| 13-12-20 | Q | Appointment of a new convenor for WG2: Voltage fluctuations and other low-frequency disturbances | Q | 14-02-14 | 77A/843/Q |
| 13-12-13 | IEC 62453-3x | IEC 62453-3x Field Device Tool (FDT) Interface Specification - Part 30x: Communication Profile Integration - IEC 61784 CPF x | CDV | 14-03-14 | 65E/336/CDV |
| 13-12-13 | IEC 61010-2-202 Ed.1 | IEC 61010-2-202 Ed.1: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve and actuator | CD | 14-03-14 | 65/552/CD |
| 13-12-13 | IEC 62424 Ed. 2.0 | IEC 62424 Ed. 2.0: Representation of process control engineering - Request in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools. | CDV | 14-03-14 | 65/544/CDV |
| 13-12-06 | DC | Maintenance programme - Call for comments regarding preparation of IEC 61000-4-16 Ed2: Test for immunity to conducted, differential mode disturbances in the frequency range 0 Hz to 150 kHz | DC | 14-02-07 | 77A/842/DC |
| 13-12-06 | DC | Maintenance programme - Call for comments regarding preparation of IEC 61000-4-13 Ed. 2: Harmonics and interharmonics including mains signalling at a.c. power port, low frequency | DC | 14-02-07 | 77A/841/DC |
| 13-10-25 | IEC 61000-6-7: Part 6-7 | IEC 61000-6-7: Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations | CDV | 14-01-31 | 77/450/CDV |
| 13-09-27 | IEC/TR 61000-4-38 | IEC/TR 61000-4-38: Electromagnetic Compatibility (EMC): Testing and measurement techniques - Calibration and Verification Protocol for Flicker Compliance test systems | CD | 14-01-10 | 77A/832/CD |
| 13-08-23 | IEC/TR 61000-4-37 | IEC/TR 61000-4-37 : Electromagnetic compatibility (EMC) - Testing and measurement techniques -Calibration and verification protocol for harmonic emission compliance test systems | CD | 13-11-29 | 77A/828/CD |
| 13-08-09 | Q | WG10 convenorship
| Q | 13-09-20 | 77B/695/Q |
| 13-08-02 | Q | Confirmation of the SC 77B ACEC representative
| Q | 13-09-13 | 77B/693/Q |
| 13-08-02 | IEC 61000-6-5 | IEC 61000-6-5: Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments | CD | 13-11-08 | 77/440/CD |
| 13-07-26 | IEC 61000-4-6 | IEC 61000-4-6: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | FDIS | 13-09-27 | 77B/691/FDIS |
| 13-06-21 | DC | Maintenance of IEC 61000-4-3 Edition 3.0
| DC | 13-08-16 | 77B/690/DC |
| 13-06-21 | DC | Call for convenor for WG10: Immunity to radiated electromagnetic fields and to conducted disturbances induced by these fields | DC | 13-08-02 | 77B/689/DC |
| 13-06-14 | IEC 61000-4-36 | IEC 61000-4-36: Electromagnetic Compatibility (EMC) - Part 4 - 36: Testing and measurement techniques - IEMI Immunity Test Methods for Equipment and Systems | CD | 13-09-20 | 77C/222/CD |
| 13-06-14 | IEC 61000-4-31 | IEC 61000-4-31 - Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test | CD | 13-09-20 | 77B/688/CD |
| 13-06-14 | IEC 61000-4-19 | IEC 61000-4-19: Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports | CDV | 13-09-20 | 77A/815/CDV |
| 13-06-07 | IEC 61000-4-24 | IEC 61000-4-24: Electromagnetic Compatibility (EMC) - Part 4 - 24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance | CD | 13-09-13 | 77C/221/CD |
| 13-06-07 | DC | Maintenance programme - Call for comments regarding preparation of Edition 3 of IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current 75 A and subject to conditional connection | DC | 13-08-09 | 77A/821/DC |
| 13-05-17 | IEC 61000-4-5 | IEC 61000-4-5: Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | CDV | 13-09-06 | 77B/685/CDV |
| 13-03-08 | DC | Future status and maintenance of publication IEC 61000-4-1 Ed.3.0 - Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series | DC | 13-06-07 | 77/434/DC |
| 13-03-01 | IEC 61000-6-5 | IEC 61000-6-5: Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments | CD | 13-06-07 | 77/432/CD |
| 13-03-01 | DC | Maintenance of publication IEC/TS 61000-1-2 Ed. 2 and its conversion into an International Standard - IEC/TS 61000-1-2: Electromagnetic compatibility (EMC) - Part 1-2: Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | DC | 13-06-28 | 77/431A/DC |
| 13-02-22 | DC | Maintenance of publication IEC/TS 61000-1-2 Ed.2.0 and its conversion into an International Standard | DC | 13-06-28 | 77/431/DC |
| 13-02-15 | Amendment 3 to IEC 61000-3-2 | Amendment 3 to IEC 61000-3-2 : Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase) | CDV | 13-05-17 | 77A/808/CDV |
| 13-02-15 | Amendment 3 to IEC 61000-3-2 | Amendment 3 to IEC 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current < 16 A per phase) | CDV | 13-05-17 | 77A/807/CDV |
| 13-02-15 | Amendment 3 to IEC 61000-3-2 (f1) | Amendment 3 to IEC 61000-3-2 (f1): Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current < 16 A per phase) | CDV | 13-05-17 | 77A/806/CDV |
| 13-02-08 | IEC 61000-3-3 | IEC 61000-3-3 : Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current < 16 A per phase and not subject to conditional connection | FDIS | 13-04-12 | 77A/809/FDIS |
| 12-12-07 | IEC 61000-4-3 | IEC 61000-4-3: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques -Power quality measurement methods | CD | 13-02-08 | 77A/805/CD |
| 12-11-16 | IEC 61000-4-5 | IEC 61000-4-5: Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test | CD | 13-01-18 | 77B/681/CD |
| 12-10-19 | DC | Maintenance programme - Call for comments regarding preparation of Edition 3 of IEC 61000-4-11: Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | DC | 12-12-14 | 77A/802/DC |
| 12-10-19 | IEC 61000-4-19 | IEC 61000-4-19: Electromagnetic Compatibility (EMC) Part 4-19 - Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances in the frequency range from 2 kHz to 150 kHz, at a.c. ports | CD | 13-01-04 | 77A/801/CD |
| 12-09-14 | NP | Electromagnetic Compatibility (EMC) Part 4-XX: Testing and measurement techniques - radiated fields in close proximity - immunity test | NP | 12-12-14 | 77B/678/NP |
| 12-08-31 | DC | Maintenance of publication IEC/TR 61000-2-5 Ed. 2 - Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments | DC | 12-11-16 | 77/422/DC |
| 12-08-17 | Q | Further extension of the term of office of the chairman of SC 77C: High power transient phenomena | Q | 12-09-28 | 77/419/Q |
| 12-06-29 | IEC 61000-6-7 | IEC 61000-6-7: Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for systems, equipment and products intended to perform functions in a safety-related system (functional safety) in industrial environments | CD | 12-10-26 | 77/418/CD |
| 12-06-15 | IEC 61000-4-6 | IEC 61000-4-6 - Electromagnetic compatibility (EMC) - Part 4-6:Testing and measurement techniques - Conducted disturbances, induced by radio-frequency fields immunity test | CDV | 12-11-16 | 77B/675/CDV |
| 12-06-01 | ISH | Interpretation sheet 1 to IEC 61000-3-12: Interpretation of requirements for equipment with unforeseen low input currents during tests according to IEC 61000-3-12: Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase | ISH | 12-08-03 | 77A/792/ISH |
| 12-05-11 | IEC 61000-4-5 | IEC 61000-4-5: Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | CD | 12-08-10 | 77B/674A/CD |
| 12-02-24 | NP | Electromagnetic compatibility (EMC) - Part 4-x: Testing and measurement techniques - Immunity to RF disturbances - Surface current sense wires method for in-situ testing | NP | 12-05-25 | 77B/671/NP |
| 12-02-24 | IEC 61000-4-30 | IEC 61000-4-30: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | CD | 12-05-25 | 77A/787/CD |
| 12-02-24 | Q | Maintenance of publication IEC TS 61000-1-2 Ed. 2 -Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | Q | 12-04-06 | 77/415/Q |
| 12-02-17 | IEC 61000-3-3 Ed3 | IEC 61000-3-3 Ed3 : Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection | CDV | 12-07-20 | 77A/785/CDV |
| 12-01-27 | IEC 61000-4-4 Ed.3 | IEC 61000-4-4 Ed.3: Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test | FDIS | 12-03-30 | 77B/670/FDIS |
| 12-01-20 | IEC/TR 60725 Ed.3 | IEC/TR 60725 Ed.3: Consideration of reference impedances and public supply network impedances for use in determining disturbance characteristics of electrical equipment having a rated current = < 75 A per phase | DTR | 12-03-23 | A/784/DTR |
| 12-01-13 | IEC 61000-4-19 Ed1 | IEC 61000-4-19 Ed1: Electromagnetic Compatibility (EMC) Part 4-19 - Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances in the frequency range from 2 kHz to 150 kHz, at a.c. ports (This document cancels and replaces 77A/783/CD) | CD | 12-04-06 | 77A/783A/CD |
| 12-01-06 | IEC 61000-4-19 Ed1 | IEC 61000-4-19 Ed1: Electromagnetic Compatibility (EMC) Part 4-19 - Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances in the frequency range from 2 kHz to 150 kHz, at a.c. ports | CD | 12-04-06 | 77A/783/CD |
| 11-12-16 | IEC 61000-4-25 Amd. Ed.1 | IEC 61000-4-25 Amd. Ed.1: Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | FDIS | 12-02-17 | 77C/216/FDIS |
| 11-11-18 | Q | Review of status of publication IEC TS 61000-1-2 Ed. 2 - Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena | Q | 12-01-27 | 77/411/Q |
| 11-11-04 | DC | Interpretation Sheet regarding IEC 61000-3-12 Ed 2
| DC | 11-12-02 | 77A/780/DC |
| 11-10-21 | DC | SC 77A ACEC representative
| Q | 11-12-23 | 77A/777/Q |
| 11-09-02 | NP | Broadband conducted immunity test on AC mains ports (Electromagnetic compatibility (EMC) - Part 4-X: Testing and measurement techniques - Immunity to conducted disturbances, induced by intentional and/or unintentional broadband signals) | NP | 11-12-02 | 77B/660/NP |
| 11-07-29 | Q | Continuation of SC77C Membership of ACEC
| Q | 11-09-09 | 77C/210/Q |
| 11-07-29 | DC | List of work items for development in IEC 61000-4-21 Ed. 3 proposed by JWG REV
| DC | 11-10-21 | 77B/654/DC |
| 11-07-22 | IEC/TR 61000-4-37 Ed.1 | IEC/TR 61000-4-37 Ed.1 : Electromagnetic compatibility (EMC) - Testing and measurement techniques -Calibration and verification protocol for harmonic emission compliance test systems | CD | 11-10-28 | 77A/761/CD |
| 11-07-15 | NP | New Work Item proposal on EC/TR 61000-4-XX. Electromagnetic Compatibility (EMC) -Testing and measurement techniques - Calibration and Verification Protocol for Flicker Compliance test systems | NP | 11-10-21 | 77A/758/NP |
| 11-07-15 | Amendment to IEC 61000-3-2 | Amendment to IEC 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <16 A per phase) | CD | 11-10-21 | 77A/756/CD |
| 11-07-01 | DC | Future tasks for maintenance of IEC 61000-4-20
| DC | 11-09-30 | 77B/653/DC |
| 11-06-03 | IEC 61000-3-3 Ed.3 | IEC 61000-3-3 Ed.3: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection | CD | 11-09-09 | 77A/755/CD |
| 11-06-03 | IEC/TR 60725 Ed3 | IEC/TR 60725 Ed3: Electromagnetic compatibility (EMC) - Consideration of reference impedances and public supply network impedances for use in determining disturbance characteristics of electrical equipment having a rated current = < 75 A per phase | CD | 11-09-09 | 77A/753/CD |
| 11-06-03 | Q | Appointment of a new convenor for WG 8 : Description of the electromagnetic environment associated with the disturbances present on electricity supply networks | Q | 11-07-15 | 77A/752/Q |
| 11-06-03 | IEC/TR 61000-1-6 Ed.1 | IEC/TR 61000-1-6 Ed.1: Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty | DTR | 11-08-05 | 77/397/DTR |
| 11-05-27 | IEC 61000-4-5 Ed.3 | IEC 61000-4-5 Ed.3: Electromagnetic Compatibility - Part 4-5:Testing and measurement techniques - Surge immunity test | CD | 11-09-02 | 77B/650/CD |
| 11-05-13 | IEC 61000-3-2 Amd.3 f2 | IEC 61000-3-2 Amd.3 f2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <16 A per phase) | CD | 11-09-02 | 77A/751/CD |
| 11-05-13 | IEC 61000-3-2 Amd.3 f1 | IEC 61000-3-2 Amd.3 f1: Electromagnetic compatibility (EMC) - Part 3.2: Limits - Limits for harmonic current emissions (equipment input current <16 A per phase) | CD | 11-09-02 | 77A/750/CD |
| 11-05-06 | DC | Maintenance of generic immunity EMC standards IEC 61000-6-1 Ed. 2 and IEC 61000-6-2 Ed. 2 | DC | 11-08-12 | 77/394/DC |
| 11-05-06 | DC | Maintenance of publication IEC TS 61000-6-5 Ed. 1 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments | DC | 11-08-12 | 77/393/DC |
| 11-04-29 | NP | New Work Item Proposal on Electromagnetic Compatibility (EMC) Part 4-XX - Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances in the frequency range from 2 kHz to 150 kHz, at a.c. ports | NP | 11-07-29 | 77A/746/NP |
| 11-04-01 | Q | Further extension of the term of office of the chairman of SC 77B: High frequency phenomena | Q | 11-05-13 | 77/391/Q |
| 11-03-25 | IEC 61000-3-15 Ed.1 | IEC 61000-3-15 Ed.1: Electromagnetic compatibility (EMC) - Part 3-15: Limits - Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network | DTR | 11-05-27 | 77A/744/DTR |
| 11-03-04 | IEC 61000-4-25 Amd. Ed.1 | IEC 61000-4-25 Amd. Ed.1: Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems | CDV | 11-08-05 | 77C/207/CDV |
| 11-02-25 | IEC/TR 61000-3-14 Ed.1 | IEC/TR 61000-3-14 Ed.1: Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for the connection of disturbing installations to LV power systems | DTR | 11-04-29 | 77A/741/DTR |
| 11-02-11 | IEC 61000-4-6 | IEC 61000-4-6: Electromagnetic Compatibility (EMC) - Part 4-6: Testing and measurement techniques - Conducted disturbances, induced by radio-frequency fields immunity test | CD | 11-05-13 | 77B/647/CD |
| 11-02-11 | IEC 61000-3-12 Ed.2 | IEC 61000-3-12 Ed.2: Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase | FDIS | 11-04-15 | 77A/740/FDIS |
| 11-01-14 | DC | Maintenance of publications: IEC 61000-4-13: Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests and IEC 61000-4-16: Electromagnetic compatibility (EMC) -Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | DC | 11-02-25 | 77A/738/DC |
| 11-01-14 | DC | Maintenance of publications:- IEC 61000-2-2: Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems and IEC 61000-2-12: Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems | DC | 11-02-25 | 77A/737/DC |
