JEMIMA Committee Seminar

事前登録制 受講無料Presents the latest information of hot topics, and the activities of the JEMIMA Committee in the field.

These seminars are conducted in Japanese language and NO English interpretation is provided.

10/31(Wed) 11/1(Thu) 11/2(Fri)

J-1
HALL_D(1008 Conference Room)
JEMIMA Committee Seminar 1
10/31  11:00~11:50
The measurement method for NEW 920MHz band wireless equipment
Makoto Fujii Manger Business Promotion Dept. Anritsu Corp.
The wireless equipment in 920MHz band attracts recently in wireless market after the frequency allocation. We introduce the measurement method for this by Signal analyzer and generator in the seminar.
J-2
HALL_E(1009 Conference Room)
JEMIMA Committee Seminar 2
10/31  15:30~16:20
International standardization of Japanese "fieldbus" in IEC
Toshiba Corporation Social Infrastructure Systems Company
Microelectronics & Systemcomponents department, Fuchu complex / Chief specialist
Koji Shibata
Toshiba Corporation Social Infrastructure Systems Company
Microelectronics & Systemcomponents department, Fuchu complex / Chief specialist
Yasuhisa Shiobara
YASKAWA Electric Corporatoin
Motion Control Devision Business Planning Department Network Strategic Promotion Team
Takeshi Tanaka
The impact of the international standards in industrial measurement, control and automation is more and more increasing on the world markets. The Japanese fieldbuses, backed by the METI, are now on further new standardization in the IEC.

J-3
HALL_D(1008 Conference Room)
JEMIMA Committee Seminar 3
11/1  13:00~14:40
Extending calibration service 2012 - The request and proposal to JCSS -
Calibration Service Committee
Although it has been about 20 years since JCSS was introduced. There is an undeveloped part including the correspondence to a diversifying electric measure. Through this seminar, proposes the request to JCSS
J-4
HALL_D(1008 Conference Room)
JEMIMA Committee Seminar 4
11/1  15:00~16:40
1.Engineering method of wireless
Yokogawa Electric Corpotration
Technology Marketing Dept., Business Planning Division, Industrial Automation Marketing Headquarters / Manager
Toshi Hasegawa
Fuji Electric Co.,Ltd
Network Technology Gr., Control System Development Dept., Control Technology Development Center, Product Technology Laboratory
Kazuhito Hinata
Yokogawa Electric Corporation
Technology Marketing Dept., Industrial Automation Marketing HQ
Hayashi Hisanori

2.Needs for Functional Safety
Toshiba Corporation
Microelectronics & System Components Department / Specialist
Junichi Kawamoto
1.Introduction of field test for site planning/engineering and trend of international standard for coexistence management.
2.The needs for Functional Safety (FS) taking typical examples of accidents, and the basics of FS are to be presented.

J-5
HALL_E(1009 Conference Room)
JEMIMA Committee Seminar 5
11/2  13:00~15:30
Prevailing Environmental Regulations around Measuring Instruments
- A global trend started from EU -
IWATSU TEST INSTRUMENTS CORP.
JEMIMA Green Product Committee,Chairman
Satoshi Sakai
HORIBA,Ltd.
JEMIMA Green Product Committee,Vice-Chairman
Kazuma Koyama
HORIBA,Ltd.
JEMIMA Green Product Committee,Vice-Chair./representative stationed in Brussels
Akihito Nakai
Vice chairman of our committee Mr. Nakai (Brussels residence) will give a lecture on the latest EU information. Other reports will cover the environmental regulations in the world (EU-RoHS2, China-RoHS2, etc.) that our committee surveyed.
J-6
HALL_D(1008 Conference Room)
JEMIMA Committee Seminar 6
11/2  16:00~16:50
Electromagnetic imaging for inspection of deteriorated houses
National Institute of Information and Communications Technology
Applied Electromagnetic Research Institute, Research Manager
Kaori Fukunaga
Strategic Study Committee for Advanced Technology
The electromagnetic imaging is expected to provide useful information to examine damaged buildings nondestructively. Field test results suggest that microwave and mm-wave are useful for concrete buildings and wooden mortar houses, respectively.

Page Top

All Rights Reserved. Copyright © 2012. Japan Electric Measuring Instruments Manufacturers' Association

JEMIMA Japan Electric Measuring Instruments Manufacturers' Association